AA Mail Server - Applicable Cases

Major Features |

Five Cases |

Quick Setup |

AA Mail Server is an easy-to-use SQL based mail server software for Win2000/WinXP/Win2003. It is great for small to medium sized business to build their own mail servers. You can install and configure AA Mail Server very easy. When follows below detailed instructions for installation, you can make email service ready as quickly as within 1 minute.

Case 4. Communicate Customers via ONE Mailbox for A Department?

Many companies hope to Communicate customers via ONE mailbox for whole company or a department. Take sales department as an example, it will be very good that all salesmen could tell customers all their mailboxes are "sales@share.com". Look below picture, your customers send mails to you via "sales@share.com" with different names, and then AA Mail Server will auto distribute each mail to the correct recipients according to its specified name.

Under this mode, all external outgoing mails of local staff will be sent via their manager mailbox. All external incoming mails to manager mailbox will be auto distributed to name specifed staff. The manager mailbox will auto keep copies for all external incoming and outgoing mails of its staff. You can aslo setup a checkup manager to checkup outgoing mails before beging sent out. Learn more: Sharing one mailbox for department.

Step 1. On your mail server, you need to do:

Install AA Mail Server ready on your server. Refer: Install AA Mail Server.
Create a domain with "Share mail server" mode. Refer: Create domains.
Create accounts for your staff. Refer: Create accounts.
1) Create an account with account type = "Special manager", e.g. "sales@mycompany.com".
2) Create local accounts with account type="Special local staff" and sepcify its manager.
Open 25/110/80 TCP ports in your firewall. Refer: Configure firewall.
If behind a router, goto router's panel to create 25/110/80 ports forwarding. Refer: Configure router.

Now your server is ready for LAN mail service (not available for Internet email communication yet). You could verify it with telnet DOS commands manualy on the server:

[1] "telnet 127.0.0.1 25": verify if AA Mail Server run ready.
[2] "telnet 192.168.1.2 25": verify if mail service is ready for LAN; if not, check firewall settings.
[3] "telnet 123.123.123.123 25": verify if mail service is ready for Internet; if not, check port forwarding settings.

Step 2. On domain control panel, you need to do:

Login your ISP domain control panel (where you applied your domain).
Create a "A" record with name of "mail.mycompany.com" and with value of your Internet IP address.
Create a "MX" record with value of "mail.mycompany.com", which you just created.

Different ISPs have different domain control panels and mostly them varies significantly. If you are not familiar with this, you can ask your ISP for help, or mail us your domain name, server' Internet IP address, login account/password so that we can configure MX for you.

After domain MX configure ready, your mail server is ready for Internet mail service. Now you could click "Diagnose" toolbar button to run diagnosise wizard for your server in AA Mail Server. Your SMTP server and POP3 server are "mail.mycompany.com" (or you can use server's IP address directly). Webmail address will be http://mail.mycompany.com/mail as default.

See also: What is domain MX?
See also: How to change Webmail URL to http://mail.mycompany.com?

Don't hesitate, just try AA Mail Server before you pay. Give us a feedback with any suggestions, you will Gain a 25%-off discount for unlimited license!

AA Mail Server :: Windows Email Server :: Mail Server for Windows